[cs615asa] hw1 issue

[Guangqi Qing]

I have tried again, but failed.

> On Feb 1, 2019, at 2:11 PM, Rozy Gupta <rgupta11 at stevens.edu> wrote:
> 
> Try to stop and restart your instance once.
> 
> Regards,
> Rozy Gupta
>  
> From: cs615asa-bounces at lists.stevens.edu on behalf of Guangqi Qing <gqing at stevens.edu>
> Sent: Friday, February 1, 2019 2:06 PM
> To: CS615 - Aspects of System Administration
> Subject: Re: [cs615asa] hw1 issue
>  
> Yes, the instance state is running, but the instance status check fails, “These checks monitor your software and network configuration for this instance.
> Instance reachability check failed at February 1, 2019 at 1:07:00 PM UTC-5 (13 minutes ago)“, I run another ubuntu instance in us-east-2, that instance work successful.
> Guangqi
> 
>> On Feb 1, 2019, at 1:59 PM, Rozy Gupta <rgupta11 at stevens.edu <mailto:rgupta11 at stevens.edu>> wrote:
>> 
>> If system checks fail then the system would not be up and running. Is your instance running?
>> 
>> Best,
>> Rozy Gupta
>>  
>> From: cs615asa-bounces at lists.stevens.edu <mailto:cs615asa-bounces at lists.stevens.edu> on behalf of Guangqi Qing <gqing at stevens.edu <mailto:gqing at stevens.edu>>
>> Sent: Friday, February 1, 2019 1:56 PM
>> To: CS615 - Aspects of System Administration
>> Subject: Re: [cs615asa] hw1 issue
>>  
>> 
>> Do you mean by the security group? It is set by default 0.0.0.0/0 allows all IP addresses to access the instance.
>> 
>>> On Feb 1, 2019, at 1:52 PM, Rozy Gupta <rgupta11 at stevens.edu <mailto:rgupta11 at stevens.edu>> wrote:
>>> 
>>> Check your security group’s inbound rule. It should have the ip address of the machine from which you are connecting your instance. 
>>> 
>>> Best,
>>> Rozy Gupta
>>>  
>>> From: cs615asa-bounces at lists.stevens.edu <mailto:cs615asa-bounces at lists.stevens.edu> on behalf of Guangqi Qing <gqing at stevens.edu <mailto:gqing at stevens.edu>>
>>> Sent: Friday, February 1, 2019 1:49 PM
>>> To: cs615asa at lists.stevens.edu <mailto:cs615asa at lists.stevens.edu>
>>> Subject: [cs615asa] hw1 issue
>>>  
>>> Hello everyone, 
>>> I have some problems in connecting aws instance. I create a pre-made ami instance of us-east-1(Virginia) ami-bc8fc8d6 micro instances t1.micro, and set everything by default. After it launches, it passes the system status but fails the instance status check, and I cannot connect it by ssh -I ~/mykey.pem root at address. Does anyone have the similar problem? Thank you for help. 
>>> Guangqi 
>>> _______________________________________________ 
>>> cs615asa mailing list 
>>> cs615asa at lists.stevens.edu <mailto:cs615asa at lists.stevens.edu> 
>>> https://lists.stevens.edu/mailman/listinfo/cs615asa <https://lists.stevens.edu/mailman/listinfo/cs615asa> 
>>> _______________________________________________
>>> cs615asa mailing list
>>> cs615asa at lists.stevens.edu <mailto:cs615asa at lists.stevens.edu>
>>> https://lists.stevens.edu/mailman/listinfo/cs615asa <https://lists.stevens.edu/mailman/listinfo/cs615asa>
>> _______________________________________________
>> cs615asa mailing list
>> cs615asa at lists.stevens.edu <mailto:cs615asa at lists.stevens.edu>
>> https://lists.stevens.edu/mailman/listinfo/cs615asa <https://lists.stevens.edu/mailman/listinfo/cs615asa>
> _______________________________________________
> cs615asa mailing list
> cs615asa at lists.stevens.edu <mailto:cs615asa at lists.stevens.edu>
> https://lists.stevens.edu/mailman/listinfo/cs615asa <https://lists.stevens.edu/mailman/listinfo/cs615asa>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.stevens.edu/pipermail/cs615asa/attachments/20190201/6d79e43b/attachment-0001.html>